Merchant Silos
Why Use this Silo
The V-Mac Merchant silo is the very best solution for storing feed for commercial sale. The protected cone allows the feed to be filled into bags or tote bins without getting wet or blown about. This protected area can also be used to house weighing platforms and associated controls.
The galvanized strip body is joined together using an interlocking process which gives a smooth wall finish on the inside while the interlocked seam on the outside gives the body added strength.
Features
- Enclosed cone – Silo body continues down to the ground enclosing the discharge cone and bagging spout. There is a 2m (6’6”) wide door opening.
- The silo is emptied using a chain & pulley system.
- allowing you to fill a tote bin or large bags easily.
- 12 inch inspection hatch on the roof.
- Ladder guard on roof to connect ladder.
- Large inspection window on cone – only available on silos up to 900 cubic feet capacity.
- Access hatch on the cone (18 inch diagonal).
- Sight glasses – one on the cone and one on the silo body above the cone. Extra sight glasses can be fitted upon request.
Approx | Capacity | Height | Diameter | |||
---|---|---|---|---|---|---|
tonnage | ( cu ft) | (cu m) | (feet) | (m) | (feet) | (m) |
18 | 1000 | 28.3 | 28′ 5″ | 8.7 | 10′ | 3m |
20 | 1100 | 31.1 | 29′ | 8.8 | 10′ | 3m |
21.5 | 1200 | 33.9 | 30′ 2″ | 9.2 | 10′ | 3m |
25 | 1400 | 39.6 | 32′ 6″ | 9.9 | 10′ | 3m |
28 | 1600 | 45.3 | 35′ 9″ | 10.9 | 10′ | 3m |
30 | 1700 | 48.1 | 38′ 1″ | 11.6 | 10′ | 3m |
35 | 2000 | 56.6 | 40′ 4″ | 12.3 | 10′ | 3m |
- Painting the silo to match sheds or to meet planning regulations – in either brown, grey or green.
- Filler and Breather pipes – can be fitted anywhere around the silo to suit your yard layout.
- Ladder with safety cages can be fitted as required.
- Extra sight glasses can be fitted as required.
- Heavy duty lid with Safety Rail can be supplied – this is particularly useful if you are going to fill the silo with a conveyor.
- Conveyor hatches – can be fitted to larger silos.
- Hoppers – can also be used to connect to augers.
- Tote bins – we can supply a range of tote bin and feed handling accessories ranging from 44 cubic feet capacity upwards – designed to be moved using forklifts or teleporters.
There are no reviews yet. Be the first one to write one.
Silo Customization
The outlets on your V-Mac silo are at standard height, however we can raise or lower these to suit your particular requirements. (E.g. some customers prefer the auger connection to be at a certain height to suit their parlour set up.
Double doors (enclosed silos only)
We can install double doors on your V-Mac silo given you 70-inch-wide access under the cone. This can allow you to fill a loader bucket or with extra height give you somewhere to store a Quad!
Again, these are usually on the front right leg of a legged V-Mac silo or on the right of the door on an enclosed silo. However, we can position them wherever suits your particular needs. It is always worth checking to see how the meal truck will access the silo and where is the best position to site the pipes.
We can fit 10-inch pipe installations to your V-Mac silo which can allow you to fill bags, buckets or loader buckets. The obviously work better with some product, like pellets as against wet mixes like blends or rations. They are connected higher up on the side of the cone so they will always have to be emptied out of the bottom of the cone.
Accessories
Body Trapdoor
Heavy Lid and Handrail with a Ladder
Heavy Duty Lid and Trapdoor
Standard Roof Inspection Hatch
Enclosed Silo Loadcell option
12 inch Auger ring and 6 inch spout
Merchant Tote Bin
Merchant Tote Bin
16 inch to 12 inch reducer and 12 inch spout
Loadcells
Trouser leg Openings
Auger Hopper
Feed Barrow
Galvanised auger box
Extended internal
Inspection Hatch
Sale Process
1.
Sale Consultation
We discuss with you your requirements and spec out the best solution – this is usually done over the phone with our experienced team and we will supply a quote giving you delivered price.
2.
Order Placed
If you want to progress, the order is placed.
3.
Order Confirmation
We send you out an order confirmation which provides details on the V-Mac Silo ordered and specifications for the type of base required, a method statement for the Installation of the V-Mac Silo and our Safety Requirements for the Silo Installation. At this stage we will highlight any additional information that is required.
4.
Production
When you slot comes up – your V-Mac silo will be made and painted (if required)
5.
Delivery Planning
Our team will call you to schedule a delivery date
6.
Delivery and Installation
Our expert team of Installers will deliver and erect your V-Mac Silo – Its important that you have the installation site clear and ready for the silo delivery and that access to the base and the site is clear and free from obstructions and animals. Installation usually only takes 1 hour for a straightforward installation.